Creator:Department of Defense
Date Created:December 3, 1975
Place Created:
Keywords:property disposal service
Context:book from property auction
**************************************************
DEPARTMENT OF DEFENSE
DEFENSE SUPPLY AGENCY
SALE NO. 41-6202
BID OPENING:
I DECEMBER 1975-10:00 A.M.
SEALED
qtlewiy.
MACHINE TOOLS AND POWER TRANSMISSION COMPONENTS
FOR SALE SITE & MAILING ADDRESS SEE PACE 19
FOR FURTHER INFORMATION SEE INSIDE
| F 8 41-6202
Defense Property Disposal Region Post Office Box 53 Defense Depot Ogden Station Ogden, Utah 84407
MERCHANDISING BRANCH
SALES CONTRACTING BRANCH
Sale Procedures, Future Sales, etc. Phone: A/C 801, 399-7773
High Bid Information, Payments, Refunds, Removal, etc. Phone: A/C 801, 399-7942
FOR FURTHER INFORMATION CONTACT THE RESPECTIVE OFFICES, USING ADDRESS:
Items 1 thru 36
Defense Property Disposal Office
Naval Air Station, Miramar, San Diego, CA 92145
Mr. R.E. Squire
Phone: A/C 714, 235-2901
Items 37 thru 52
Defense Property Disposal Office
North Island Naval Air Station, San Diego,
CA 92135
Mr. Thomas L. Smith Phone: A/C 714, 437-7825
Items 53 thru 59
Defense Property Disposal Office Naval Construction Battalion Center, Port Hueneme, CA 93043 Mr. James R. Orton Phone: A/C 805, 982-5756
Items 60 and 61
Defense Property Disposal Office McClellan Air Force Base, CA 95652 Mr. C.L. Chandler Phone: A/C 916, 643-3830
Items 62 thru 68
Defense Property Disposal Office Rough & Ready Island, Stockton, CA 95203 Mr. Tony A. Sita
Phone: A/C 209, 466-6031, Ext. 267
For Shipping Information: A/C 209, 466-6031, Ext. 260 Items 69 thru 72
Defense Property Disposal Office
Mare Island Naval Shipyard, Vallejo, CA 94592
Mrs. Helen Webb
Phone: A/C 707, 646-4368
Item 73
Defense Property Disposal Office Oakland Army Base, Oakland, CA 94626 Mr. Willie Hansel Phone: A/C 415, 466-2241
Items 75 thru 77
Defense Property Disposal Office Fort Lewis Logistics Center, Fort Lewis, WA 98433 Mr. Bermud K. Walmer Phone: A/C 206, 967-5121/5206
Item 78
Defense Property Disposal Office Defense Depot Ogden, Ogden, UT 84407 Mr. Daniel J. Cunningham Phone: A/C 801, 399-7927
Items 79 thru 85 \ Defense Property Disposal Office / Tooele Army Depot, Tooele, UT 84074 ] Mr. Louis D. Brems / Phone: A/C 801, 882-2550, Ext. 2642
Items 86 and 87
Defense Property Disposal Office Pueblo Army Depot, Pueblo, CO 81001 Mr. Jess Garcia Phone: A/C 303, 549-4938
Items 88 and 89
Defense Property Disposal Office
Puget Sound Naval Supply Center,
Bremerton, WA 98314
Mr. C.A. Scott
Phone: A/C 206, 478-7217
Item 90
Defense Property Disposal Office Marine Corps Supply Center, Barstow, CA 92311 Mr. Ernie Escajeda Phone: A/C 714, 577-6340
Item 91
Defense Property Disposal Office Luke Air Force Base, AZ 85309 Mr. Joe Damico or Mr. Robert Mahoney Phone: A/C 602, 935-7411, Ext. 7144
Item 74
Defense Property Disposal Office Umatilla Army Depot, Hermiston, OR 97838 Mrs. Edith W. Flower Phone: A/C 503, 567-6421
IFB 41-6202
INDEX
DESCRIPTION	ITEM NUMBER	DESCRIPTION	ITEM NUMBER
Bearing Set, Sleeve.....................60
Bending & Forming Machine...............22,32,42,43,76,89
Casting Machine.........................19
Cut-Off Machine, Band Saw, Vertical
Standard..............................6
Drill, Glass............................53
Drill Press.............................40
Dry Honing Machine......................33
Etching Machine.........................46
Flanging Machine........................51
Furnace.................................23,24,44,45,64,65
Grinding Machine........................7,8,31,74,90
Hammer, Forging.........................41
Hammer, Power...........................48
Heater, Heat Treating...................47,67
Honing Machine..........................49,52
Inducto Furnace Control.................25
Jointer, Woodworking....................88
Lathe...................................1,2,10,12,21,39,
........................................63,75
Sandblast Machine......................20
Sand Polisher/Grinder..................35
Saw, Band..............................4,9
Saw, Band, Metal Cutting...............5
Saw, Radial, Overarm...................59
Sawing & Filling Machine,
Combination Contour..................3
Shaper, Gear...........................77
Shaping Machine, Horizontal
Mechanical Plain, Box Table..........18
Sheave, Cable..........................79-82
Spray Gun, Metalizing, Flame, Wire.....87
Strander, Wire.........................78
Stretch-Forming Machine................58
Tank, Unheated.........................86
Tenoner, Woodworking...................34
Unloader...............................36
Welder.................................28,37,85
Welding Machine........................55,56,62,68,70,
.......................................71,91
Welding Positioner, Table Type
Power Operated.......................69
Machine, Molder, Plastic.
Mini-Jec tor...........................54
Mechanical Power Transmission Comps.
& Acces...............................83,84
Metalizing Equipment....................50
Metalworking Machinery & Acces..........17,79
Milling Machine.........................11,13,14,38,61,72
Nail Pulling Machine, Electric
Powered...............................73
Oven, Electric..........................29
Planer, Jointer, Woodworking............26
Positioner, Welding.....................30
Power Supply, Controlled ARC............27
Press, Hydraulic........................66
Rectifier, DC Power Supply..............15,16
Riveting Machine........................57
PAGE NO. 1
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
4.	SAW, BAND: 1942, Yates American Mach.
Co., Model Y36, Serial B16762, floor mounted, 36" throat, work table 36" x 36". Powered by electric motor, The Louis Allis Co., 5 HP, 220/440 V, 3 phase, 60 cycle, _ 870 RPM, 15.2/7.6 amps. Parts damaged ^ , including motor housing broken, saw blade, wiring, surface rust. Outside - Wood Skidded - Used - Poor Condition - Repairs Required Total Cost $2100
Est. Total Wt. 2500 lbs.	1 EACH
O/A shipping dim: 100" H, 47" W, 64" L.
3.	CONTINUED
SAW, BAND, METAL CUTTING: Machine Tool Div., Kalamazoo Tank & Silo Co., Model 1220 W, Serial LJ 798. Powered by electric motor, The Peerless Electric Co.,
1 HP, 208 220/440 VAC, 50/60 cycle, 3 phase, 3.6/1.8 amps, 1450/1750 RPM. Machine can take a 1" wide, 13'11" long saw blade. Parts damaged including drip pan, surface rusted. Parts missing including blade and accessories.
Outside - Used - Poor Condition - Repairs Required
Total Cost $1165
Est. Total Wt. 2000 lbs.	1 EACH
0/A shipping dim: 43" H, 36y W, 85" L.
7777777777777777777777777777777777777777777777777777777777777
ITEMS 1 THRU 36 ARE LOCATED AT THE NAVAL AIR STATION, MIRAMAR, SAN DIEGO, CALIFORNIA /////////////////////////////////////////////////////////////
1.	LATHE, WOODWORKING: Oliver Mach. Co., Model
51B, Serial 50307 floor type. Powered by Howell induction motor, Serial 302270, 220 V, 3 phase, 60 cycle. Table length 86", 0/A 48" H, 17" W, 102" L. Parts damaged including surface rusted. Parts missing including IC 2, |	chucks, tool rest, attachments and accessories.
Outside - Used - Poor Condition Total Cost $452
Est. Total Wt. 600 lbs.	1 EACH
3.	SAWING AND FILLING MACHINE, COMBINATION
CONTOUR: Doall Western Co., Model V26, Serial 26451521, 26" throat, max. saw length 177", hydraulic tilt and power feed table size 30V x 30V1. Powered by Westinghouse Induction Motor, Serial 50745, Style 1168723, 1.5 HP, 220/440 V, 3 phase, 60-50 cycles, 725/1435 RPM, 4.4/2.2 amps, 0/A dim; 86 3/4" H, 524"W, 56V' L. Parts damaged including body, wiring, controls, gears, switches, surface rusted. Parts missing including switches, controls, motor housing, electrical wiring, attachments and accessories. Outside - Used - Poor Condition Total Cost: $3650
Est. Total Wt: 2800 lbs.	1 EACH
CONTINUED
2.	LATHE, WOODWORKING: Blount Co., yr., model
and serial unknown, floor type. Powered by electric motor, 5 HP, 440 V, 3 phase, 60 cycles, Serial 1217151. Table length 40". Parts damaged including surface rusted. Parts missing including chucks, tool rests, attachments and accessories. Outside - Used - Poor Condition Total Cost $452
Est. Total Wt. 350 lbs.	1 EACH
O/A shipping dim: 47" H, 21" W, 51" L.
PAGE NO. 2
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
CUT-OFF MACHINE, BAND SAW, VERTICAL, STANDARD: 1942, Armstrong Blum Mfg. Co., Model Marvel Metal Band Saw No. 8, Serial 81743. tilting column, manual feed, multiple speed, 18" x 18" work capacity, chain drive. Powered by a multispeed induction motor, Lewis Allis Co., Serial 42621, 1.5/.75 HP, 220 V, 3 PH, 60 cycle, 1740/870 RPM, 5.6/3.4 amps. Parts damaged Including switches, wiring, drive chains, unpainted surfaces rusted. Parts missing including blade, and accessories. Outside- Used - Poor Condition - Repairs Required
Total Cost $1510
Est. Total Wt. 2000 lbs.	1 EACH
0/A shipping dim: 81 1/2" H, 36" W, 78" L.
hth inc-8h1i
GRINDING MACHINE, CARBIDE TOOL: Hammond Machinery Builders Inc., Model W10, Serial 4483, floor type, pedestal mounted, double end, wet, tilt work tables, 10" dia. wheel, with coolant pump, spindle speed 1900 RPM. Powered by an electric motor. Parts damaged including pump, wiring, fittings, controls. Parts missing including motor, wheel, control fittings and accessories.
Outside - Used - Poor Condition - Repairs Required
Total Cost $358
Est. Total Wt. 600 lbs.	1 EACH
O/A shipping dim: 48" H, 29" W, 47 1/2" L.
GRINDING MACHINE: Mfr., model and serial unknown, double end, pedestal mounted. Powered by an electric motor, HP unknown, 220/440 V, 3 phase, 60 cycle. Grinding wheel 10" x 2", shaft dia.
1 1/8", pedestal is mounted on a steel pallet size 48" x 48". O/A dimension of grinder with pedestal 51 1/2" H, 32" W, 19" D. Parts damaged including surface rusted, eye shield, electrical wiring. Parts missing including 1 ea grinding wheel, wiring, eye shield, attachments and accessories.
Outside - Used - Poor Condition - Repairs Required
Total Cost $3040
Est. Total Wt. 700 lbs.	1 EACH
0/A shipping dim: 56 1/2" H, 48" W, 48" L.
CONTINUED
SAW, BAND: Yates American Mach. Co., Model Y36, Serial B19506, floor mounted, 36" throat, work table 36" x 36", powered by an electric motor, 5 HP, 220 V, 3 phase, 60 cycle. Parts detached but included, wheel cover guard, work table, blade wheel. Parts damaged including motor drive shaft, upper wheel shaft, motor base broken, table tilt housing broken, body dented, unpainted surfaces rusted. Parts missing including saw blade and accessories.
Outside - Wood skidded - Used - Poor Condition -Repairs Required Total Cost $1175
Est. Total Wt. 2500 lbs.	1 EACH
0/A shipping dim: 100" H, 38" W, 62" L.
10. LATHE: The Nebel Machine Tool Co., Series LN,
Serial 437116. Powered by GE motor, 5 HP, 440 V, 60 cycle, 3 phase, 1735 RPM, spindle speeds 12, 20, 36, 58, 80, 130, 245, 400. Parts damaged including wiring, drip tray, surface rusted. Parts missing including drive belts, control handles,	I
chucks and accessories.	' '
Outside - Used - Poor Condition - Repairs Required
Total Cost $1000
Est. Total Wt. 3000 lbs.	1 EACH
0/A shipping dim: 50" H, 45" W, 120" L.
11. MILLING MACHINE: Van Norman Machine Co., year
and serial unknown, Model 22L, knee type, combina-tion horizontal and vertical, plain semi-auto- "J^lty matically operated, 24" longitudinal table travel, 11" cross table travel, 17" vertical knee travel, head spindle speeds 40-1100 RPM, 0/A table dim: 45" L, 10" W. Powered by U.S. Electrical Motors Inc., motor, 2 HP, 220/440 V, 3 phase, 60 cycle, 1200 RPM. Parts damaged including unpainted surfaces rusted. Parts missing including attachments and accessories. Outside - Used - Poor Condition Total Cost $2400
Est. Total Wt. 3500 lbs.	1 EACH
Est. shipping dim: 70" H, 64" W, 58 1/2" L.
PAGE NO. 3
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT. SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
15. RECTIFIER, DC POWER SUPPLY: P. R. Mallory & Co. Inc., Serial 56695, Type K28PA300, P/N C400286, Spec. 7064622, DC output 300 amps, 28 V, AC input 230/460 V, 30/15 amps, 60 cycles, 3 phase. Portable, mounted on two solid rubber tires. Outside - Used - Poor Condition Total Cost $250
Est. Total Wt. 300 lbs.	1 EACH
O/A shipping dim: 51" H, 26" W, 25" L.
16. RECTIFIER, DC POWER SUPPLY: Same description as Item 15, except: Serial 56700
1 EACH
17. METALWORKING MACHINERY: Consisting of:
1 ea. - Shaper, horizontal, Havir Mfg. Co., Model B, Serial 1293, 8" stroke, work table 7" x 7 %", O/A dim: 52" H, 21V W, 35%" D.
1 ea. - Engraving machine, pantograph two dimension, George Groton Mfg. Co., Model 3 U, Serial 29885, work table 8" x 12". O/A dim: 49" H, 21 1/4" W, 23 1/2" D. Both machines damaged including unpainted surfaces rusted. Both machines parts missing including motors, wiring, switches, control handles, attachment and accessories. Outside - Used - Poor Condition - Repairs Required
Total Cost $2170
Est. Total Wt. 500 lbs.	1 LOT
CONTINUED
LATHE, HEAVY DUTY: 1952, The Monarch Machine Tool Co., model unknown, Serial 34904, size 13", actual swing 15.5", distance between centers 54". Powered by DC motor, Reliance, Type T, Serial 1LT15182T3, 230 V, O/A dim: 51" H, 43" W, 127" L. Parts damaged including controls, unpainted surfaces rusted. Parts missing including chucks, attachments and accessories. Outside - Used - Poor Condition Total Cost $17,106
Est. Total Wt. 6200 lbs.	1 EACH
14. MILLING MACHINE, VERTICAL:' Year unknown,
Cincinnati Milling Machine Co., Model #2, Serial 4A2VIY-75, table work surface 12" x 52". J	Powered by electric motor, 7 1/2 HP, 220/440 V,
"	60 cycle, 3 phase. Parts damaged including
electrical control panel, surface rusted. Parts missing including head attachments and accessories. PEC 3417-2320-2813. Outside - Used - Poor Condition - Repairs Required
Total Cost $16,070
Est. Total Wt. 6000 lbs.	1 EACH
O/A shipping dim: 80" H, 71" W, 81" D.
CONTINUED
MILLING MACHINE: Knee type, horizontal, plain, Cincinnati Milling Machine Co., Model 5 HP, Serial 8A5PIL-22, 50" table travel, 0/A table dim: 83" L, 21" W. Powered by Wagner Electric Co., Motor, 20 HP, 220/440 VAC, 3 phase, 60 cycle, 1750 RPM. Parts damaged including electrical control panel, wiring, hand cranks, surface rusted. Parts missing including tool head, accessories and attachments. PEC 3417-2150-5026. Outside - Used - Poor Condition - Repairs Required
Total Cost $13,159
Est. Total Wt. 11,500 lbs.	1 EACH
O/A shipping dim: 77" H, 118" W, 98 1/2" L.
PAGE NO. 4
IFB 1-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
19. CONTINUED
Est. Total Wt. 6000 lbs.	1 EACH
0/A shipping dim: 63" H, 63" W, 93 1/2" L.
20. SANDBLAST MACHINE: Ruemelin Mfg. Co., Type AG, Serial 15009, size 60 x 36, one manually operated front door with counter weights. Powered by electric motor, Louis Allis Co., 1.5 HP, 220/440 V, 60 cycles, 3 phase, belt driven blower. Parts damaged including body rusted, door, counter weight arms, hoses, fittings. Parts missing including belts, nozzle attachments and accessories.
Outside - Used - Poor Condition - Repairs Required
Total Cost $450
Est. Total Wt. 1800 lbs.	1 EACH
0/A shipping dim: 75" H, 71" W, 58" L.
21. LAfHE, HEAVY DUTY: 1953, Monarch Machine Tool Co., size 16", Serial 37913, actual swing 24.5", distance between centers 54". Powered by electric motor, GE, 10 HP, 220/440 V, 60 cycle, 3 phase. With coolant pump powered by electric motor, Louis Allis Co., No. 1942448, 1 HP, 220/440 V, 3 phase, 60 cycle, 3.6/1.8 amps, 1155 RPM. Parts damaged including surface rusted. Parts missing including chucks, attachments and accessories. Outside - Used - Poor Condition Total Cost $550
Est. Total Wt. 6000 lbs.	1 EACH
0/A shipping dim: 56 1/2" H, 65" W, 128" L.
19. CASTING MACHINE: 1969, Centrifugal Casting Machine Co., Model CB24-24. Serial J-2279B, max. capacity 24" dia. x 24" L, 230/460 V, 3 phase, 60 cycle. Powered by D.S. Electrical Motor Co., Serial P4269406, 10 HP, 220/440 V, 3 phase, 60 cycle, max. RPM 1750. Parts damaged including unpainted surfaces rusted, switches, fittings and attachments. Parts missing including fittings, attachments and accessories. Outside - Used - Poor Condition - Repairs Required
Total Cost $12,640	CONTINUED
18. SHAPING MACHINE, HORIZONTAL MECHANICAL PLAIN. BOX TABLE: Gould & Eberhardt, Model 16" industrial universal, Serial 3592A10, capacity 16" stroke. Powered by Westinghouse induction motor, 5 HP, 220/440 V, 3 phase, 60 cycles, 1740 RPM, floor mounted. O/A dim: 57" H, 42" W, 80" L. Parts damaged including unpainted surfaces rusted. Parts missing including attachment and accessories. Outside - Used - Poor Condition Total Cost $3000
Est. Total Wt. 4000 lbs.	1 EACH
PAGE NO. 5
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT. SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
23. FURNACE, ELECTRIC: Blue M. Electric Co., Model CW2012, Serial EE119, 440 VAC, 3 phase, 60 cycle, 6800 watts, temp, range 150°F, to 1200°F, door entrance 23" x 23", compartment 19 3/4" W x 18" D x 19 1/4" H. Parts damaged including controls, temp, gauges.
Outside - Used - Poor Condition Total Cost $1550
Est. Total Wt. 2000 lbs.	1 EACH
n O/A shipping dim: 42" H, 37 1/2" W, 55 1/2" L.
INDUCTO FURNACE CONTROL: Inductotherm Corp., Model 200, Serial J62140, high frequency rating 180 cycles, 200 KW, 750 V, 60 cycle, supply rating: 460 V, 3 phase, 335 KVA. Parts damaged ) including tubing, connections. Parts missing including tubing, connections and attachments. Outside - Used - Poor Condition Total Cost $950
Est. Total Wt. 2500 lbs.	1 EACH
O/A shipping dim: 90" H, 52" W, 36" L.
PLANER, JOINTER, WOODWORKING: Hand feed, year and model unknown, Rockwell Mfg. Co., Serial 92-8576. Powered by electric motor, depth of cut 0 to 1/2", work table 32 1/2" L, 6 1/2" W, jointer fence tilt to 45°, jointer fence 4" H, 26 1/2" L, cutter 6" W. O/A dim: 36" H, 14" W, 38" L. Parts damaged including unpainted surfaces rusted. Outside - Used - Poor Condition Total Cost $350
Est. Total Wt. 250 lbs.	1 EACH
24. FURNACE, ELECTRIC: Linberg Engineering Co., Type 2848-E14, Serial 12599, 60 KW, 460 V, 3 phase, max. temp. 1400°F. With motor, electric, Elliott Co., Crocker Wheeler Div., 3 HP, 220/440
V, 7.6/3.8 amps, 3 phase, 60 cycle, RPM at full load 1730, rise 55c cont. Parts damaged including surface rusted.
Outside - Used - Poor Condition Total Cost $4477
Est. Total Wt. 5000 lbs.	1 EACH
0/A shipping dim: i07" H, 61" W, 75" L.
CONTINUED
POWER SUPPLY, CONTROLLED ARC: M & T Welding Corp., Model 500-40, Serial SG 737. Input: 208-230-460 VAC, 60 cycle, 3 phase, 60/30 amps. Output: 500 amps, 40 VDC. Parts damaged including wiring, controls, unpainted surfaces rusted. Parts missing including wiring and controls. Outside - Used - Poor Condition - Repairs Required
Total Cost $1450
Est. Total Wt. 800 lbs.	1 EACH
O/A shipping dim: 38" H, 25" W, 34" L.
WELDER, SHIELD ARC: The Lincoln Electric Co., Serial A52625, Type SAE, 300 amps, rating 40 V nema. Motor: 440 V, 29 amps, 3 phase, 60 cycles, 1800 RPM. Trailer mounted with towbar pull. Parts missing including trailer wheels. Outside - Used - Poor Condition Total Cost $510
Est. Total Wt. 1000 lbs.	1 EACH
O/A shipping dim: 55 1/2" H, 47" W, 75" L.
BENDING AND FORMING MACHINE: Mfr., model and serial unknown, 3 rolls, pyramid type. Powered by electric squirrel cage Induction polyphase motor, Century Electric Co., 5 HP, 220/440 V, 50/60 cycle, 3 phase. Length of rolls 62", diameter 5". Parts damaged including unpainted surfaces rusted. Outside - Used - Poor Condition Total Cost $500
Est. Total Wt. 2500 lbs.	1 EACH
0/A shipping dim: 120" L, 36" W, 52 1/2" H.
CONTINUED
PAGE NO. 6
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
GRINDING MACHINES: Consisting of:
Pedestal mounted, floor type.
1 ea - Yr., Mfg., Model and Serial unknown, double end, wheel dia 16", shaft dia 1 7/16". Powered by electric motor 5 HP, 220 V, 60 cycle, 3 phase. 0/A dim: 50V H, 33 3/4" W, 29V L. Parts damaged including pedestal cracked, wiring, surface rust. Parts missing including eye shields, wheel guards, table and wiring.
1 ea - The U.S. Electrical Tool Co., double end, shaft dia IV. Powered by electric motor, General Electric, D.C., Model CIN6320, 3 HP, 230 V. 11.6 amps 1750 RPM. O/A dim: 46" H, 45V VJ, 20" L Parts damaged including wiring, wheel guards, suface rusted. Parts missing including switch, eye shields, wheels, wiring.
Used - Poor Condition - Repairs
Outside ' Required
Total Cost $900
Est. Total Wt. 650 lbs.
1 LOT
CONTINUED
DRY HONING MACHINE: Portable, 1965 (. 1966, Vacu-Blast Co. Inc., Model 41303, Spec. No. XWS-4667 (F), Trade Mark - Junior Dry Honer. Powered by air. Parts damaged including gauges, controls. Parts missing including covers, hoses, filters, gauges.
FSN 4940-872-1712.
Outside - Used - Poor Condition- Repairs Required Total Cost $500
Est. Total Wt. 350 lbs.	5 EACH
TENONER, W00IW0RKING: 1945, Oliver Machinery Co., Model 125-D, Serial 61484. Three Cope Head Electric Motors. The Louis Allis Co., 2 HP,
3 phase, 220 V, 60 cycles. 6.4 amps, 3500 RPM, two each mounted on control side, one each on opposite side. Two adjustable electric motors, The Louis Allis Co., 1 HP, 220 V, 60 cycles, 3.3 amps, 3500 RPM, mounted in center of machine. Floor mounted, sliding table, o/a dim: 65" L, 50" W. 57" H. Parts missing and damaged. Outside - Used - Poor Condition - Repairs
Re1ulred	CONTINUED
30. POSITIONER, WELDING: Table type, power operated, 1945, Ransome Concrete Machinery Co., size 13, Serial 4600, capacity 3000 lbs., C. of G. 12" above table and 12" eccentric. Motor data: 1 each -lis HP, 220/440 V, 60 cycle, 3 phase;
1 each - 1 HP, 220/440 V, 60 cycle-, 3 phase, 40" square table. Parts damaged including frame, body dent, and surface rusted. PEC 3436-1115-4524.
Outside - Used - Poor Condition - Repairs
Required
Total Cost $750
Est. Total Wt. 1800 lbs.	1 EACH
O/A shipping dim: 69%" H, 53" W, 60" L.
32. BENDING MACHINE: Pedrick Tool and Machine Co., No. I, Serial 4022, floor mounted type. Powered by G.E. Induction Motor, Serial 148440, 5 HP, 220 V, 60 cycle, 3 phase. Work table dia: 39V o/a dim: 37V H, 45V W, 44" L. Without attachments or accessories. Parts damaged including " controls, surface rusted.
Outside - Used - Poor Condition Total Cost $1500
Est. Total Wt. 700 lbs.	1 EACH
OVEN, ELECTRIC: 1945, Despatch Oven Co., Serial 24073, Style RS-0, Control-Auto., 230 V- phase - D.C., K.W. 4, 18 amps, heat 450° F, chamber dim; 38" H, 24V W, 24%" D. Parts damaged including body dented, wiring, controls, unpainted surfaces rusted. Parts missing including wiring, controls, Outside - Used - Poor Condition - Repairs Required
Total Cost $275
Est. Total Wt. $800 lbs.	1 EACH
0/A shipping dim: 75" H, 39" W, 35" L.
31. CONTINUED
PAGE NO. 7
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT. SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
34. CONTINUED
Total Cost $2500 Est. Total Wt. 3,000
lbs. 1 EA
1 EACH
35.
SAND POLISHER/GRINDER: Year unknown, Beardsley & Piper Div. Pettibone Mulliken Corp. "Mulbaro", Serial MB3-13635804. Powered by electric motor, type NC225X, Serial R852441, 2.5 HP, 60 cycle, 3 phase, 220/440 V, 1740 RPM, 7.0/3.5 amps. 50" H, 39" dia.
Outside - Used - Poor Condition - Repairs Required
Total Cost $2102
Est. Total Wt. 1100 lbs.	1 EACH
UNLOAPER: Year and Mfr. unknown, steam powered 36. vacuum suction system type, vacuum tank mounted
on 4 steel legs, has two steel channels for lifting and moving by forklift. Used for cleaning out shipboard tanks or compartments. O/A dim: 152" H, 61" W, 67" L. Parts damaged including fittings, pipes, rust. Outside - Used - Poor Condition Total Cost $2223
Est. Total Wt. 1500 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777777777
ITEMS 37 THRU 52 ARE LOCATED AT NAS NORTH ISLAND, SAN DIEGO, CALIFORNIA ///////////////////////////////////////////////////////////■
39.
LATHE: 12", Lodge & Shipley, Serial 38351, model and year unknown^ Floor mounted, Powered by Century Electric Co., squirrel-cage induction polyphase electrical motor, Model SO-225-JC4-3, Serial 10Z40726, 3 HP, 3 phase, 220/440 V, 60 cycles, 1740-1450 RPM, 8/4 - 8.5/4.25 amps, continuous duty rating, temperature rise 40% for 60 cycles. Parts damaged including levers. Inside - Used - Poor Condition - Repairs Required
Total Cost $4580
Est. Total Wt. 4000 lbs.	1 EACH
DRILL PRESS: Buffalo, Model 18, upright, floor mounted, serial and year unknown. Inside - Used - Poor Condition - Repairs Required
Total Cost $250
Est. Total Wt. 400 lbs.	J EACH
HAMMER, FORGING: Chambersburg Engineering Co.,
Serial 289952, model unknown. Steam or air,
single frame, guided ram, 300 lb. blow.
Est. dim: 8', 11" H, 4' W.
Inside - Used - Fair Condition
Total Cost $2500
Est. Total Wt. 4992 lbs.	1 EACH
FORMING MACHINE: 1941, Peck, Stow & Wilcox Co. Model 299-B, Serial 41, capacity 20 gauge max., air controlled. Mounted on metal stand. Inside - Used - Poor Condition Total Cost $295
Est. Total Wt. 300 lbs.	1 EACH
BENDING MACHINE: 1969, Conrac Corp. Model MBX, Serial 9295-802, tube type bender, size 1". Inside - Used - Poor Condition - Repairs Required
Total Cost $250
Est. Total Wt. 400 lbs.	1 EACH
WELDER, SPOT AND BUTT: Eisler Engineering Co. Inc., Serial 22533, upright, floor mounted. Primary volts 220, 68 amps, fuse 78, 60 cycles, 15 KVA, duty cycle 50%. Machine No. 215. Inside - Used - Fair Condition Total Cost $150
Est. Total Wt. 450 lbs.	1 EACH
FURNACE: Lindberg Hevi-Duty type ll-SP-153012-20
Serial 21279, 18 KW, 1 phase, 2000 maximum
temperature Fahrenheit; 115 V, 60 cycles. 3 pieces.
FSN 3424-383-2854.
Inside - Used - Fair Condition
Total Cost $3550
Est. Total Wt. 3000 lbs.	1 EACH
MILLING MACHINE: Cincinnati Milling Machine Co., model, serial and year unknown. Pcwered by American Aircraft Mfg. Co. electric motor, Model C104500, Serial EB56, type R, 3 phase, 3/4 HP, 220/440 V, 2-1 amps, 60/50 cycles, 3350 RPM, 9 PF, Frame 81*2. Inside - Used - Fair Condition Total Cost $1000
Est. Total Wt. 1500 lbs.	1 EACH
FURNACE: Same description as item 44, except: 2 pieces.
1 EACH
PAGE NO. 8
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT. SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
46.
ETCHING MACHINE: 1969, Western Technology Inc., Model DYNAMIL 707, Serial 359. Spray chemical milling, remote operated, horizontal, conveyor-ized system, caster mounted, 1/6 HP, 115/230 V, single phase, 60 cycles, speed 3420. Inside - Used - Poor Condition Total Cost $15,395
Est. Total Wt. 800 lbs.	1 EACH
HEATER, HEAT TREATING, INDUCTION: 1957, Lepel High Frequency Labs Inc., Model T10-3, Serial 10-264, vacuum tube type, 23.5 KVA, 230V, 60 amps, 60 cycles. Accessories include 1 control unit with timer, Model 1CT, 1 foot control. Inside - Used - Poor Condition Total Cost $6126
Est. Total Wt. 1300 lbs.	I EACH
HAMMER, POWER: 250 lb. ram, 1927, Moloch Foundry and Machinery Co., Serial E-96, model unknown, electrically operated, guided ram driven electrically. Belt driven G.E. motor Model 400036, Serial 4580220, 13.25 amps, 22V, 5 HP continuous. Outside - Used - Poor Condition Total Cost $1234
Est. Total Wt. 3000 lbs.	1 EACH
HONING MACHINE, DRY, STATIONARY: Year unknown, Industrial Cleaning Machines Inc. Model 12542, Serial 00020, Powered by bicrwer motor, 5 HP, 3450 RPM, 460/230 V, 60 cycles, 6.9/13.8 amps. Light and switches, 115V, 60 cycles, 70 amps. FSN: 3419-867-2372.
Outside - Used - Poor Condition - Repairs Required
Total Cost $3950
Est. Total Wt. 2000 lbs.	x EACH
METALIZING EQUIPMENT: 1962, Plasmadyne Div. of Geotel Inc., Model SPECIAL, Serial unknown. Plasma spray, powder type, capacity 1000 amps, continous duty torch, 1/3 HP, 220/440 V, 3 phase, 60 cycles, 1725 RPM, AC/DC. Outside - Used - Good Condition Total Cost $34,878
Est. Total Wt. 11,000 lbs.	i each
FLANGING MACHINE: 1942, Peck, Stow & Wilcox Co., Model 542, Serial 1627E, upright, floor mounted. Powered by electric motor Model SK-73DC3B5A; 3/4 HP, 220 V, 425/1725 RPM, temperature rise 60° C/ 40° C, continous duty, 60 cycles. Outside - Used - Fair Condition -Total Cost $684
Est. Total Wt. 500 lbs.	1 EACH
HONING MACHINE: 1946, Micromatic Hone Corp, Model H2, Serial 203, internal, hydraulic stroke, 21" maximum honing diameter. Powered by electric motor, 2 HP, 220/440 VAC, 3 phase, 1140 RPM, 60 cycles.	j.
Outside - Used - Fair Condition	4r -7 1 ^
Total Cost $3000	U \ *-•
Est. Total Wt. 3100 lbs.	1 EACH
fcf.
o
//////////////////////////////////////////////////////////// ITEMS 53 THRU 59 LOCATED AT NCBC, PORT HUENEME, CALIFORNIA ////////////////////////////////////////////////////////////
DRILL, GLASS: 1950, Henry G. Lange Machine Works Model 26UB, Serial 22516. Base working surface 32" x 48" wood table top. Single spindle, 4 speed, ¥' chuck, drills to center of 70" diameter circle. Belt driven by a electric motor, 1/3 HP, 110/220 V, 60 cycles, 1 phase, 1725 RPM. Bench type, 0/A dim: 48" L x 32" W x 60" H.
Inside - In wood crate - Used - Fair Condition Total Cost $261
Est. Total Wt. 780 lbs.	1 EACH
MOLDER MACHINE, PLASTIC, MINI-JECTOR: 1959, Newberry Ind. Inc., Model 60PC100, Serial 3491F59, injection cap per shot 1 oz with 7/8" cylinder, hydraulic-mechanical, used in all thermo plastics, 110/115/120 VAC, 60 cycle, 1 phase. 0/A dim: 36" L x 17" W x 73" H. Inside - Used - Poor Condition Total Cost $3050
Est. Total Wt. 500 lbs.	1 EACH
WELDING MACHINE, FLEXARC, DC: 300 amps, 1943, Westinghouse, generator type, Serial 73-57F143, 60-375 amp range, 40 V, 60% duty cycle, 1450 RPM. Direct coupled to a Chrysler T118-505, Serial 6919, 6 cylinder gasoline engine, trailer mounted, towing tongue with 4 ea. steel wheels, housed in a weatherproof steel housing. Parts missing including battery and fan belt. Outside - Used - Poor Condition - Repairs Required
Total Cost $1100
Est. Total Wt. 4100 lbs.	1 EACH
WELDING MACHINE, FLEXARC, DC: Same description as itera 55, except: Engine serial 5649. Parts missing including battery and hardware.
1 EACH
RIVETING MACHINE: 5 Ton Cap., 1950, General Engineering Co., Model 10DC, Serial 36295, squeeze type, pneumatic, floor mounted, gap type, 36" throat. Parts missing including accessories and misc. hardware. Outside - Unpacked - Used - Fair Condition Total Cost $1250
Est. Total Wt. 1400 lbs.	1 EACH
PAGE NO. 9
IFB 1-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
STRETCH-FORMING MACHINE: Hufford Machine Works Inc., Model A10, Serial 6000 58, working capacity; 0" to 180" finish length. Hydraulic tension cylinders: 35,000 pounds capacity, 5.125" bore, 19.125" stroke. Hydraulic pumps and valves: Vickers, 2000 PSI. Table: 65" x 30" x 35V. Die width for 180° bend: 18" minimum. Working floor space: 22' x 12'-4". Motor Data: 15 HP, 3 phase, 1200 RPM. Parts detached but included hydraulic fluid tank and junction box. Parts missing including misc. hardware. Inside - Used - Fair Condition Total Cost $16,933
Est. Total Wt. 11,600 lbs.	1 EACH
59. SAW, RADIAL, OVERARM: 16", 1970, Stewart
Avionics Inc., Model 6326-28, Serial 6328-14. Electric plant: 15KW, Canron Limited Model B291MX-2PV0CW-CP, Serial 8-131182-12, 18.7 KVA, 120/208 VAC, 60 cycle, 3 phase, 52 amps, 1800 RPM. Direct couple to a Hercules Model D1700, Serial JK3604866, 3 cylinder diesel engine. Trailer mounted, l*i Ton, 1968, Stevens Mfg. Co. Model M103A3, Serial 319, single axle, wheel size 20", "A" frame drawbar with lunette eye. Parts detached but Included saw overarm unit, and wiring harness. Parts missing including radiator hose, V belts, batteries, starter coil injection pump, saw & motor blade & hardware. USN 59-00923. NSN 3220-00-060-8965.
Outside - Used - Poor Condition - Repairs Required
Total Cost $8473
Est. Total Wt. 5800 lbs.	1 EACH
/////////////////////////////////////////////////////////// ITEMS 60 AND 61 ARE LOCATED AT McCLELLAN AFB,
zfm?7nuiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiniiiniiiinn
60.
BEARING SET, SLEEVE: Leece Neville Co.,
P/N 2096-071061.
NSN: 3120-00-089-2707.
Outside - Yard 21, 206 A004 - Packed in cartons Unused - Good Condition Total Cost: $7847
Est. Total Wt. 1188 lbs. 3516 each
MILLING MACHINE, HORIZONTAL PLAIN: 1943, Kearney & Trecker Corp., Model K, Serial 11-4415, table working surface; 65" L x 12" W, table travel 28" longitudinal, 10" across, 17" vertical, 17" maximum distance from spindle center to table top. Powered by Allis-Chalmers Mfg. Co., electric motor, 7.5 HP, 220/440 V, 3 phase, 60 cycle, floor type, mounted on wooden skid.
NSN: 3417-00-196-7326. •
Outside - Yard 21, Row' 176, A6 - Skidded - Used -Poor Condition - Repairs Required Total Cost $7519
Est. Total Wt. 2000 lbs. 1 EACH Article BD: Military/Munitions List Items applies.
Est. shipping dim: 84" L x 84" W x 74" H.
//////////////////////////////////////////////////////////// ITEMS 62 THRU 68 ARE LOCATED AT ROUGH & READY ISLAND, STOCKTON, CALIFORNIA /////////////////////////////////////////////////////// 62. WELDING MACHINE, DC ARC: Year unknown, Lincoln Electric Co., Type SAE300, Serial A462044, generator type, 300 amp. rating, 60 duty cycle, 60 to 375 amp., 40 V, 58/29 amp., 208/220/440 VAC, 3 phase, 60 cycles. Broken parts Including J Q I ammeter, undercarriage and cowling around exiter. 1	ID# M06313.
NSN 3431-00-241-2141.
Inside - Bldg. 803 - Section 1, Row 1 - Used -Poor Condition Total Cost $2500
Est. Total Wt. 1440 lbs.	1 EACH
63.
LATHE, TURRET, SADDLE: Year unknown, Warner & Swasey Co., Model M-510, Serial 1275819, fixed center, manual, 3>5" diameter bar, 20" swing over/bed. Powered by 30 HP, 220/440 VAC, 3 phase, 60 cycles, 1760 RPM, electric motor. ID # 93055-803454.
Inside - Bldg. 803, Section 1, Row 1 - In One Box and Unpacked - Used - Fair Condition. Total Cost $24,976
Est. Total Wt. 8950 lbs.	1 EACH
64.
FURNACE, ELECTRIC, BOX TYPE: Year unknown, Pacific Scientific Co,, Model PNM-122412, Serial P1307. Natural atmosphere, 2500° F., maximum operating temperature, Chanfcer Dimensions: 24" L x 12" W x 12" H. Furnace wired for 65/170
V, 2 phase, 60 cycles, 36 KW.. ID # AF-508235.
Inside - Bldg. 803, Section 1, Row 1 - On Four Skids and Unpacked - Used - Fair Condition. Total Cost $7550
Est. Total Wt. 3105 lbs.	1 EACH
65.
FURNACE, ELECTRIC: Year unknown, Pacific Scientific Co., Model PNR-818-P. Serial P1310, 115 V, 1 phase, 10 KW maximum input, 1850° F, maximum temperature. Chamber Dimension: 8" diameter and 18" depth. Some parts broken including chancer bricks. Furnace is equipped with 2 each transformers and 1 each D.C. controlled reactor. ID # AF-508246.
Inside - Bldg. 803, Section 1, Row 1 - In One Box and One Unpacked - Used - Fair Condition Total Cost $3378
Est. Total Wt. 2240 lbs.	1 EACH
PAGE NO. 10
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO
IFB 41-6202
LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
66. PRESS, HYDRAULIC: lear unknown, Pratt &
Whitney Corp., Model PWA-16980, Serial unknown, vertical, double action, 1450 PSI, vane reforming, C-Frame. Data plate missing. ID # AF-528632.
Inside - Bldg. 803, Section 1, Row 1- On One Skid and Unpacked - Used - Fair Condition. Total Cost $8542
Est. Total Wt. 3740 lbs.	i EACH
HEATER, HEAT TREATING: 1960, Research Inc., Model 6634, Serial 1, infrared, high intensity, single panel type, electric motor h HP, 208/440 VAC, 3 phase, 60 cycles, 1725 RPM.. ID « AF-338684.
Inside - Bldg. 803, Section 1, Row 1 - Used -Poor Condition Total Cost $29,775
Est. Total Wt. 2000 lbs.	1 EACH
WELDING MACHINE, ARC, AUTOMATIC: 1959, Pandjiris Weldment Co., Model IT198TCM-Seamer, Serial 25-1949, stake type, 192" maximum welding length, 115/230 VAC, 1 phase, 60 cycles. ID * AF-338753.
Inside - Bldg. 411, Row 14-23, Accessories are inside Bldg. 805, Section 1, Row 35-21-In Three Boxes, Three Wooden Skids and Unpacked Used - Fair Condition Total Cost $96,000
Est. Total Wt. 69,720 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777/77777/
ITEMS 69 THRU 72 ARE LOCATED AT MARE ISLAND NAVAL SHIPYARD, VALLEJO, CALIFORNIA ////////////////////////////////////////////////////////
69.
WELDING POSITIONER, TABLE TYPE, POWER OPERATED: 1949, Aronson Machine Co., Model 14HD3000, Serial H600SS10391, Table Size 52" X 52", Motor Data; 2 HP, 1725 RPM, Tilt & Rotation from Electric Motors. PEC 3436-115-4524.
Inside - Bldg. 655 - Used - Fair Condition Total Cost $2295
Est. Total Wt. 1000 lbs. 1 EACH
WELDING MACHINE, DC ARC: Lincoln Electric Co., "Shield Arc", Type Sae, 600 Welder, Serial A102087, Electrical Data: 220 VAC, 3 phase, 60 cycle, 1800 RPM, 40 Volt Nema. Unit mounted on Metal Frame with 3 Metal Wheels and Towing Ring.
Inside - Bldg. 655 - Used - Poor Condition Total Cost $577
Est. Total Wt. 400 lbs.	1 EACH
WELDING MACHINE, DC ARC: Hobart Brothers Co., Type 300 Amp., Serial DW 12361, Motor Data; 20 HP, 220/440 VAC, 3 PH, 60 cycle, 1750 RPM. Unit Mounted on metal frame with 4 metal wheels & towing ring.
Inside - Bldg. 655 - Used - Poor Condition Total Cost $403
Est. Total Wt. 350 lbs.	1 EACH
MILLING MACHINE, HORIZONTAL, UNIVERSAL #3 TYPE: 1944, Kearney & Trecker Corp. Model H, serial 48-4657, table size 13V x 54", travel 34", feed is' to 30' per minute, spindle speed 20 to 1000 RPM, #50 taper. Belt drive, HP electric motor, General Electric 220/440 VAC., 3 ph., 50/60 cycle, 1450/1750 RPM. 0/A dim. 7' L., 7' W., 5V H. ID » 221-052407.
Inside - Bldg. 655 - bsed - Fair Condition -Repairs Required Total Cost $15,835
Est. Total Wt. 6500 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777777777777
ITEM 73 IS LOCATED AT OAKLAND ARMY BASE, OAKLAND, CALIFORNIA.
73.
NAIL PULLING MACHINE, ELECTRIC POWERED: 1971, Robertson and Schwartz, Model DK107, Motor data: 2 HP, 230/460 VAC, 3 ph., 60 cycle, 1730 RPM. Equipped with Winsmith speed reducer. Floor model.
NSN 3695-00-102-0120.
Inside - Bldg. 802 - Used - Fair Condition Total Cost $12,242
Est. Total Wt. 500 lbs.	1 EACH
777777777777777/77777777777777777777777777777777777777777777777
ITEM 74 IS LOCATED AT UMATILLA ARMY DEPOT, HERMISTON, OREGON
llllllllllllllllllllllllllllllllllllimillimilllllllll
74.
GRINDING MACHINE: Cincinnati Grinder, Inc. Howell Electric Motor Co., Model Unknown, Serial 2M2H1W-500, one wheel 19" dia. with 6" face, one wheel 10V dia. with 6" face. Floor type, polyphase induction motor, 20 H.P., 1760 RPM, 60 eye, 220 V., 47.8 Amps., 3 ph., Type K, Temp. Rise 55 Cont., 440 V., 23.9 Amp., Code F. Separate control panel, Reliance adjustable speed control unit, H.P., 3 ph. motor, 220/440 V, 1735 RPM, for AC operation. Inside - Bldg 12 - On Skids - Used - Good Condition - Repairs Required Total Cost $8649
Est. Total Wt. 980 lbs.	1 EACH
PAGE NO. 11
IFB 1*1-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT.
SEE INSIDE FRONT COVER FOR NAME, ADDRESS, AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.
illlllllllllllllllllllllllllllllllllllllllllllllllllllll
ITEMS 75 THRU 77 ARE LOCATED AT FORT LEWIS, WASHINGTON ////////////////////////////////////////////////////////

75. LATHE, METALWORKING, WITH THREAD CUTTING
ATTACHMENT: Model and year unknown, Bamford-Chase Machine Co., Serial 4375, bed length 88", 54" cc, 18" swing, cross slide 15", screw on chuck, belt driven with 3 1/4" shaft, compound feed, electric motor 2 HP, 3 PH, 60 cycle, 120-220 V. Floor mounted. O/A Dim: 9'3" L x 2'5" W x 4'3" H. Outside - Bldg. 9670 - Used - Poor Condition -Repairs Required Total Cost $2400
Est. Total Wt. 2800 lbs.	1 EACH
11ST
'76.J BENDING MACHINE, TUBE: Leonard Precision Products Co., Bendmaster Model PB, Serial 182, pneumatically operated, outside air supply required, air consumption 2 CFM at 80-100 PSIG. For average operation, 2 pneumatic power cylinders and 1 hydraulic control cylinder, tandem mounted, capacity to 1 1/2" OD, annealed ferrous or nonferrous tubing, right operated, maximum radius 8" centerline, clamping manual toggle, mandrel rod, tube length over mandrel 11', mandrel stroke 1" rod adjustment 2", speed control adjustable 2 1/2 to 12 RPM, return stroke 25 RPM, chain drive, 10 stop self-indexing of degree of bend, plane of bend and distance between bends, floor mounted. Length: 13' (Including sweep arm) Width: 38" (Including sweep arm) Height" 33" (Floor top of bed)
40" (Floor to centerline of mandrel) Outside - Bldg. 9670 - Crated - Used - Poor Condition - Repairs Required Total Cost $2075
Est. Total Wt. 1500 lbs.	1 EACH
77.
sl^
SHAPER, GEAR: Fine pitch, Fellows Gear Shaper Co., Type 3" GS, Serial 30411-557. Floor mounted, with diagram of lubricating instructions. Change gear formula: No. Teeth in Cutter „ A x C x 1 x i
No. Teeth in Gear
B
with mounted electric motor, Westinghouse, 3 PH, Type FS, 1/2 HP, frame 66, 1425/1725 RPM, 50/60 cycles, code JH, 208/220/440 V, 1.58/.79 amps, serv. factor 10, Serial HZ, 55°C, hours cont. Inside - Bldg. 9670, Bay 7 - Used - Poor Condition - Repairs Required Total Cost $6031
Est. Total Wt. 1300 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777777
ITEM 78 IS LOCATED AT DEFENSE DEPOT OGDEN, 0GDEN, UTAH
////////////////////////////////////////////////////////
78. STRANDER, WIRE: Wire Machinery Corp. of
America, Type HSS, Serial 37256 HR57, 7 wire, tubular, size 6 1/2, 7 1/2 HP, high torque, r-ft Q 220/440 V, 3 PH, 60 cycle.
'	Inside - Whse. 2C, Bay 5 - Packed - Unused -
Good Condition Total Cost $4745
Est. Total Wt. 6000 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777777;
ITEMS 79 THRU 85 ARE LOCATED AT TOOELE ARMY DEPOT, TOOELE, UTAH
////////////////////////////////////////////////////////
3
METALWORKING MACHINERY ACCESSORIES: Consisting of:
1 Ea. - Cutter, milling machine, Morse High Speed, 3" OD x 4" face.
1	Ea. - Cutter, milling machine, National
High Speed, 3" OD x 4" face.
2	Ea. - Cutter, milling machine, Shelton
#6404.
2 Ea. - Cutter, milling machine, #50 O.K.
Tool Co. P/N 6404X. 1 Ea. - Mandrel set: Consisting of: 1 ea. 2" to 2 3/4" #9. 1 ea. 2 3/4" to 3 3/4" #10. 1 ea. IV to 2" #8. 1 ea. 1" to 1 9/16" #14. Inside - Bldg C-02-01-50 (63001) - Packed Used - Fair Condition Total Cost $478
Est. Total Wt. 100 lbs.	1 LOT
-1 /oi.
SHEAVE, CABLE: Insley Mfg. Corp. P/N T-54184-A
or P/N M2041, 9>s" diameter, 2" thick, 2" dia.
shaft bearing. Some rust.
Outside - Area V-01-01 (63004) - Unpacked -
Unused - Good Condition
Total Cost $704
Est. Total Wt. 360 lbs.	20 EACH
SHEAVE, CABLE:
Same description as item 94.
20 EACH

SHEAVE, CABLE: Same description as item 94, except:
Total Cost $1408
Est. Total Wt. 720 lbs.	40 EACH
83.
Si
MECHANICAL POWER TRANSMISSION COMPONENTS AND ACCESSORIES: Consisting of:
5 Ea. - Motor, gear case, Howard Industries Type W 26 PC26BFO, 30 in. lbs. ,	115 V, 60 cycle, 28 RPM.
\ II	NSN 3010-00-790-6258.
2 Ea. - Gear, Clark Equip. Co. P/N 730531.
NSN 3020-00-932-1067. 79 Ea. - Bearing, rod end, V bearing
opening, mounted on 5/16" male rod adapter.
NSN 3120-00-535-7181. 26 Ea. - Belt, V-type matched set of 2 ea. gates P/N B-44, 5/16" side, 42" outside length. NSN 3030-00-931-0919. Inside - Bldg C -02-01-46 (63005) - Packed -Unused - Good Condition Total Cost $1656
Est. Total Wt. 68 lbs.	1 LOT
PAGE NO. 12
IFB 41-6202
IT HAS BEEN DETERMINED THAT THIS PROPERTY IS NO LONGER NEEDED BY THE FEDERAL GOVERNMENT. SEE INSIDE FRONT COVER FOR NAME, ADDRESS. AND TELEPHONE NUMBER OF PERSONS TO CONTACT FOR FURTHER INFORMATION AND/OR INSPECTION OF PROPERTY LISTED IN THIS IFB.

84.
u
MECHANICAL POWER TRANSMISSION COMPONENTS: Consisting of:
1 Ea. - Gear Set, Mack P/N 741KBA195A.
NSN 3020-00-545-1539. 1 Ea. - Shaft, flexible, Aviation Electric P/N 07213-AED33883-4. NSN 3040-00-401-9467. 3 Ea. - Gear, bevel, American Hoist P/N 255-D8401. NSN 3020-00-353-1510. Outside - Area V-01-01 (63006) - Packed and Unpacked - Used - Fair Condition - Some Rust Total Cost $802
Est. Total Wt. 608 lbs. 1 LOT
85.

WELDER: Harnischfeger Model WNG300B, 300 amp. Powered by Continental Model FA-162, 6 cylinder, inline, liquid cooled gasoline engine. Parts damaged including shroud, control panel, hose, carburetor. Parts missing including muffler, battery, panel gauge and cables. NSN 3431-00-021-8696.
Outside - Area V-01-01 (63007) - Unpacked - Used Poor Condition Total Cost $2476
Est. Total Wt. 2500 lbs. 1 EACH
77777777777777777777777777777777777777777777777777777777777
ITEMS 86 AND 87 ARE LOCATED AT PUEBLO ARMY DEPOT, PUEBLO, COLORADO. ///////////////////////////////////////////////////////////
86. TANK, UNHEATED: 1950, Cooper Model AIR48E,.
Automatic agitating, inside dimensions, 48" L. x 36" W, X 30" Deep, basket size 45" L. x 30" w x IV deep. Two part cover, hinged on each t	end of tank, operated by air cylinder.
Outside - 2B6 - On pallet - Used - Poor Condliton - Repairs Required Total Cost $1100
Est. Total Wt. 300 lbs.	i EACH
87.	SPRAY GUN, METALIZING, FLAME, WIRE: Electric
Motor drive type, 1962, Metco Inc., Model K, _ with Metco type W wire control and attached type 2 W wire straightener, type C Automatic Control System console for flame spraying, Boston Gear Ratiotrol DC motor, speed control type 3K flame spraying machine, type K metalizing machine, cabinet with 1/3 HP and k HP motor. Accessories and assorted packaged items, including hose, adapters, mask, and engraving set. Parts missing. Inside - T166 - Stored on pallets, In 2 boxes and unpacked - Used - Fair Condition - Repairs Required
Total Cost $16,175
Est. Total Wt. 5900 lbs. 1 EACH
Article BD: Military/Munitions List Items applies.
//////////////////////////////////////////////////////////// ITEMS 88 AND 89 ARE LOCATED AT PUGET SOUND NAVAL SHIPYARD, BREMERTON, WASHINGTON
///////////////////////////////////////////////////////////
88.
tot
JOINTER, WOODWORKING: Moak Machine and Tool Co., Serial 5513, Motor driven, Five V - belt drive, Floor mounted on 3 legs, capacity 16", 3 knives, Peerless Motor Serial PH254-313356. 13-6.5 amps, 5 HP, 220/440V, 3 phase, 60 cycles, 1750 RPM. O/A Dims: 7' L X 4'W x 4' H. USN 251017141. Inside - Bldg: Poor Condition Total Cost $575 Est. Total Wt. 1900 lbs.
288ROW080 - Unpacked - Used -
1 EACH
89.
77 A
BENDING MACHINE, PIPE: Wallace Supplies Mfg. Co., Machine No. 1402-6, serial 2266-1831, Ram Type, Hydraulic operated with direct coupled motor, mounted on rubber tires, capacity 2" pipe, IV Angle and IV Bar. Westinghouse Electric Motor, 3 HP, 1155 RPM, 220/440 V, 3 phase, 60 cycle, 9.4/4.7 amps. 0/A Dim: 8'L X 3'W X 3VH. With accessories including dies. NID 251-804103.
Outside - Bldg. 210NEWSHD - Unpacked - Used -Poor Condition - Repairs Required Total Cost $2868
Est. Total Wt. 3000 lbs.	1 EACH
7777777777777777777777777777777777777777777777777777777777777
ITEM 90 IS LOCATED AT MCSC, BARST0W, CALIFORNIA ////////////////////////////////////////////////////////////
90.
sod ,
GRINDING MACHINE, SURFACE: Reciprocating designed, floor mounted, spindle position horizontal, Sonmers and Maca Glass Machinery Co., style 20A-106WBRB, spindle diameter 1.5" work surface 18.0" L, work surface 6.0" W, longitudinal travel 20.0". Feed method power, wheel diameter 7.0 " head vertical adjustment 12.0" head feed type hand, distance from spindle center end to w.rk surface to 14.24", power source electric motor, HP rating 1.0, 230 VAC, 60 cycles, 3 phase. Parts missing including electric motor and belts. FSN 3415-223-6336.
Inside - Unpacked on pallet - Used - Poor
Condition
Total Cost $4776
Est. Total Wt. 900 lbs.	1 EACH
77777777777777777777777777777777777777777777777777777777777r
ITEM 91 IS LOCATED AT LUKE AIR FORCE BASE, ARIZONA
huwjjjj.ujjjjuu
91. WELDING MACHINE: Rex Welding and Eng. Co., electrical resistance, spot, press type, 3 PH, Type AN-AS-PRO.RE-100, P/N W7973-A-2, S/N 9959, size 100 KVA, class A, 60 cycle, 208/220/440/550 V. NSN 3432-00-255-9992. Outside - Sales Yard - Skid Mounted - Used Poor Condition Total Cost: $7210
Est. Total Wt: 7500 lbs.	1 EACH
Coy,
U.S. GOVERNMENT PRINTING OFFICE: 650499/l79
PAGE NO. 13
DPDS Form 82 Sep 73
IFB 41-6202
ADDITIONAL GENERAL INFORMATION & INSTRUCTIONS SEALED BID
(See DPDS pamphlet, "Sale by Reference, August 1973" and/or DISC pamphlet, "Sale by Reference, February 1971", for General Information and Instructions 1 thru 16.)
17. PREPARATION OF ENVELOPE: Envelopes containing bids must be sealed. The return address entered in the upper left corner of envelope should be the same as the bidder name and address entered on the bid form. The lower left corner should indicate the sale number and date and hour of bid opening. If a "Bidder Identification Number" has been assigned to the bidder, by the Defense Property Disposal Service, this number should also be encored on the face of the envelope. Prepare envelope as indicated below:
Name (Same as on Bid Form) Address of Bidder (Zip Code)
Sales Contracting Officer Defense Property Disposal Region Post Office Box 53 Defense Depot Ogden Station Ogden, Utah 84407 Bid - Sale No. (Enter Sale No.) Opening Date & Time: (Enter date & time) BIDDER IDENT. NO. (If Assigned)
>
CAUTION
DO NOT MAIL BIDS TO DOD SURPLUS SALES, P. 0. BOX 1370, BATTLE CREEK, MICHIGAN
18.	TELEGRAPHIC MODIFICATIONS OF BIDS: Telegraphic modifications (or withdrawals) of bids are to be sent to the Sales Contracting Officer, Defense Property Disposal Region, TELEX No. 388-351, answer back code DPDR OGED,
Utah, and must be received prior to the time set for bid opening.
19.	INSPECT IUN UAIt ANU llMt Beginning 13 nov- 1975 excluding Saturdays, Sundays and Federal holidays.
Inspection hours: 8:00 A#M> to 3:00 p.M.
20.	ELIGIBILITY OF BIDDERS: Notwithstanding the provisions of Condition No. 24, General Sale Terms and Conditions (Standard Form 114C) which requires a bidder to certify he is not under 21 years of age, individuals 18 years of age or older are eligible to bid on this sale.
21.	PAYMENT REQUIREMENT: Full payment for the property must be made directly to the sales office conducting the sale.
22.	NOTICE: Bids on this sale will be processed by automatic data processing equipment under a system which is not capable of evaluating combination bids. Accordingly, qualified, tie-in, all-or-none or other combination or floating bids will be rejected. BIDDERS MUST submit a distinct individual price for each item bid upon in order for their bids to be considered for the award.
23.	Foreign National's who desire to inspect or remove surplus property at Defense Property Disposal Office, Bremerton must obtain prior clearance to enter. Requests for entry must be received by the Defense Property Disposal Office, P.O. Box 2-B, Naval Base Post Office, Puget Sound Naval Shipyard, Bremerton, Washington 98314, at least 5 days in advance of the anticipated visit. Requests for clearance may be directed by telephoning A/C 206, 278-7317.
24.	Bidders requiring entry to Puget Sound Naval Shipyard, Bremerton, Washington to inspect or remove surplus property must enter via the Farragut Avenue gate only.
PAGE NO. 14
DPDS Form 83 Mar 75
(Page I)
IFB 41-6202
CONDITIONS OF SALE - SEALED BID
The General Information and Instructions and General and Special Conditions of sale are hereby incorporated by reference and become a part of this Invitation for Bids and any contract resulting from acceptance of bid submitted pursuant to this Invitation for Bids as fully as though such Instructions, Terms and Conditions had been specifically set forth herein. The Instructions, Terms and Conditions are contained in Defense Property Disposal Service pamphlet entitled "Sale by Reference - Instructions, Terms and Conditions Applicable to Department of Defense Surplus Personal Property Offered For Sale by Defense Property Disposal Service, dated August 1973" and DLSC pamphlet entitled "Sale by Reference - Instructions, Terms and Conditions Applicable to Department of Defense Surplus Personal Property Offered by Defense Surplus Sales Offices, dated February 1971". The Instructions, Terms and Conditions in each of the pamphlets are identical. The pamphlet, dated August 1973, may be obtained upon request from the following address: DoD Surplus Sales, P.O. Box 1370, Battle Creek, Michigan 49016. Copies are also available for review at each Defense Property Disposal Region sales office and Defense Property Disposal Office. The specific Instructions, Terms and Conditions applicable to this sale are as follows:
DPDS pamphlet, "Sale by Reference, August 1973" and/or DLSC pamphlet, "Sale by Reference, February 1971":
Part Is General Information and Instructions (DPDS Form 81, Aug 73 and/or DLSC Form 81, Feb 71), Complete.
Part 2: General Sale Terms and Conditions (Standard Form 114C, Jan 70 Ed. and DPDS Form 84, Aug 73
and/or DLSC Form 84, Feb 71), All Conditions, EXCEPT Condition No. 30 - See Article BB below.
Part 3: Special Sealed Bid Conditions (Standard Form 114C-1. Jan 70 Ed.), All Conditions. Bidders particular attention is drawn to Condition A which reads as follows.
"A. BID DEPOSITS. Where a bid deposit is required by the Invitation, all bids must be accompanied by such deposit in the amount of 20% of the total amount bid which must be in the possession of the Contracting Officer by the time set for bid opening. Bid deposits shall be in the form prescribed in Condition No. 4, General Sale Terms and Conditions (Standard Form 114C). Deposit Bond-Individual Invitation, Sale of Government Personal Property (Standard Form 150) properly executed or, when provided for in the Invitation, reference to an approved Deposit Bond-Annual, Sale of Government Personal Property (Standard Form 151) are acceptable in lieu of the form of deposit authorized in Condition No. 4, General Sale Terms and Conditions (Standard Form 114C). Any bid which is not timely supported by an acceptable bid deposit may be rejected as nonresponsive. Any bid deposit received after bid opening will be considered in the same manner as late bids."
Part 7: Special Circumstance Conditions (DPDS Form 86, Aug 73 and/or DLSC Form 86, Feb 71). As specified in item description.
IN ADDITION TO THE ABOVE THE FOLLOWING IS ALSO INCORPORATED AS PART OF THIS SALE:
ARTICLE BA: PAYMENT. Notwithstanding any provision of this Invitation to the contrary, payment of the full purchase price prior to removal of any of the property must be made in cash, certified or cashiers check, postal or telegraphic money order. UNCERTIFIED PERSONAL OR BUSINESS CHECKS ARE NOT AN ACCEPTABLE FORM OF PAYMENT. In the event an uncertified business or personal check that was accepted as a bid deposit has been honored by the drawee prior to the removal of property, such amount shall be credited to the balance due the Government.
ARTICLE BB: GUARANTEED DESCRIPTIONS. Notwithstanding any other provisions of this Invitation for Bids to the contrary, and subject to the limitations and conditions set out in subparagraphs a and b below, all of which are of the essence, the Government guarantees to the original Purchaser of the property that the property delivered or offered for delivery under any contract resulting from this Invitation for Bids will be as described in the Invitation for Bids.
a.	That if a misdescription is determined to exist prior to removal of the property from Government control, that the sole and exclusive remedy available to the Purchaser will be refund of the purchase price of the property as to which such misdescription exists, or such portion thereof as the Government may have received.
b.	That if a misdescription is determined to exist after removal of the property from Government control, then the Government will make an adjustment in the purchase price paid for the property commensurate with the market value of the property actually received provided, however, that:
(1)	No adjustment will be made for shortages of property offered for sale by the "lot", and
(2)	No adjustment will be made unless the Purchaser mails or otherwise furnishes to the Contracting Officer a written notice, within 30 calendar days from date of removal of the property, that the property is misdescribed and holds the property sufficiently intact to permit identification by the Government, PROVIDED FURTHER THAT THE GOVERNMENT DOES NOT WARRANT OR GUARANTEE ANY OF THE FOLLOWING:
(a)	That the item description contains all specific characteristics or performance data pertaining to the item described.
(b)	The stated condition of the property, the total cost of the property, the estimated total weight, the estimated shipping dimensions, suggested uses of the property, and the property's fitness for any use or purpose.
(c)	Estimates as to the "weight" of the property offered for sale by the "unit" or by the "lot".
(d)	Estimates as to the number of units of property offered for sale by "weight".
(e)	In the event the Government uses a manufacturer's part or reference number or a Federal Stock Number in addition to detailed descriptive data in the item description, the descriptive data applicable to such part or reference number or Federal Stock Number is not guaranteed if it is inconsistent with the detailed descriptive data applicable to the item description.
PACE HO. 15
IFB
DPDS Form 83	41-6202
Mar 75 {Pige 2)
CONDITIONS OF SALE - SEALED BID «™ED>
(f)	To the extent property is described solely by noun nomenclature, manufacturer's part or reference number and Federal Stock Number, the description data applicable to the Federal Stock Number is not guaranteed if it is inconsistent with the descriptive data applicable to the manufacturer's part or reference number.
(g)	In no event will the term "or interchangeable" following a manufacturer's part or reference number be construed to guarantee that the property described consists of the part or reference number in whole or in part. Only functional interchangeability with the part or reference number is guaranteed.
c.	Notwithstanding any of the exceptions stated in subparagraph b (2) (a) through (g) above, however, the Government will accept return of any property determined to have been mlsdescribed, to a location specified by the Contracting Officer at the Purchaser's expense, and refund to the Purchaser the purchase price or such portion thereof as the Government may have received, provided timely notice of the misdescription has been furnished to the Contracting Officer in accordance with the requirements of subparagraph b (2) above.
d.	The foregoing guarantee is in lieu of all other guarantees, express or Implied, and all other obligations on the part of the Government to deliver or offer for delivery property as described in the Invitation for Bids and shall not entitle the Purchaser to any payment for loss of profits or any other money damages, special, direct, indirect,
or consequential; nor shall any recovery of any kind against the Government under this provision be greater in amount than a refund of the purchase price of the specific material found to have been mlsdescribed.
ARTICLE BC: INTEREST. Condition No. 11, General Sale Terms and Conditions (Standard Form 1I4C) is hereby amended by increasing the stated interest rate from six percent to eleven percent.
ARTICLE BD: MILITARY/MUNITIONS LIST ITEMS. (1) The purchaser warrants and covenants that except as permitted by this clause, none of the items identified in the Sales Invitation for Bids or contract as subject to this Article will be directly or indirectly used or disposed of for military use or exported from the United States, Puerto Rico or the Virgin Islands without a full disclosure of the origin of the property by reference to this Invitation for Bids and contract number being made to the appropriate export licensing department or agency. (2) Notwithstanding the provisions of Paragraph (1) above, Military Munitions List items which do not require demilitarization may be sold for military or other use to the United States Government, its designees and to such foreign governments or international organizations as to which the United States Department of State Issues an export license under the International Traffic In Arms Regulations (see 22 CFR, Subchapter M, Part 121, et seq.).
PAGE NO. 16
DPDS Form 85	IFB 41_6202
Sep 73
LOADING TABLE
(See DPDS pamphlet, "Sale by Reference, August 1973" and/or DLSC pamphlet, "Sale by Rcferi-ncc, February 1971", Part 2, Condition No. 8. Standard Form 114C. )
TIME FOR REMOVAL. The removal period is established on the basis that a written notice of award will be made by 10 December 1975. Should the written notice of award on any item(s) not be made by the above date, an appropriate allowance will be made in the date of removal for such items. Property must be removed by: 9 January 1976.
LOADING LEGEND
| - Government will load.
|| - Government will load - Open top conveyance only.
HI - Government will load - No rail facilities available for use by the purchaser.
IV - Purchaser must load - No
Y - Other restrictions.
			assistance w	ill be furnished
			by the Government.	
		LOADING HOURS:		
	ITEM	LOCATION	LOADING	
1 1	thru 36	NAS, Miramar	See Legend	III (See A below)
37	thru 52	NAS, North Island	See Legend	III
53	thru 57, 59	NCBC, Port Hueneme	See Legend	I
58		NCBC, Port Hueneme	See Legend	III
60	and 61	McClellan AFB	See Legend	III
62	thru 68	Rough & Ready Island	See Legend	I (See B below)
69	thru 71	Mare Island Naval Shipyard	See Legend	I
72		Mare Island Naval Shipyard	See Legend	II (See A below)
73		Oakland Army Base	See Legend	III
74		Umatilla Army Depot	See Legend	I
75	thru 77	Fort Lewis	See Legend	I
78		Defense Depot Ogden	See Legend	I
79	thru 85	Tooele Army Depot	See Legend	I
86	and 87	Pueblo Army Depot	See Legend	V. Government will load
				truck/trailer only.
88	and 89			
		Puget Sound Naval Shipyard	See Legend	Ill
90				
		MCSC, Barstow	See Legend	III
91				
		Luke AFB	See Legend	I
NOTES:
A. The purchaser shall notify the Property Disposal Officer 24 hours in advance of desired pickup.
B. The purchaser shall notify the Property Disposal Officer 48 hours in advance of desired pickup.
PAGE NO. 17
IFB 41-6202
SdEFENsT?-----h SERVICE/
/	[property DISPOSAlJ-
DEFENSE PROPERTY DISPOSAL REGION-EUROPE
ANNOUNCES A GIGANTIC
SPOT BID SALE
IFB 50-6100
TO RE HELD IN LATE NOVEMRER 1975
SALE INCLUDES.....
WHEELED VEHICLES, TRAILERS, CRANES (CRAWLER AND TRUCK MOUNTED), TRACKED TRACTORS (IHC AND CAT), ROUGH TERRAIN FORKLIFTS, GENERATORS, PUMPS, TRACKED CONCRETE PAVING MACHINES, GRADERS, WHEELED INDUSTRIAL TRACTORS (CLARK AND CAT), CONVEYORS, CRANE ATTACHMENTS, ROCK CRUSHERS, COMPRESSORS. VEHICLE PARTS AND ACCESSORIES, MATERIAL HANDLING EQUIPMENT.
MAILED AND HAND CARRIED BIDS WILL BE ACCEPTED. 20 PERCENT DEPOSIT REOUIRED
ASALE CATALOG MAY BE OBTAINED BY WRITING TO: (WRITE TO ONLY ONE ADDRESS)
APO MAIL:
Defense Property Disposal
Region Europe ATTN: Department BR APO New York 09332
PAGE NO. 18
INTERNATIONAL MAIL:
Defense Property Disposal
Region Europe D 6200 Wiesbaden 1 ATTN: Department BR Postfach 2027 West Germany
IMPORTANT NOTICE TO ALL BIDDERS CONCERNING RECEIPT OF SALES CATALOGS
If the numeral 2 appears in the first line between the two signs of your address label ... _
888888 @2@ SALE 01-3100
it means
that you must notify the Defense Surplus Bidders Control Office that you desire to continue receiving sales catalogs or your name will be removed from our bidders list.
COMPLETE THE FOLLOWING FORM AND MAIL THIS PAGE (with your address label on the back) TO THE ADDRESS SHOWN ON THE FORM:
CHANGE FORM MAIL TO: DOD SURPLUS SALES P. 0. BOX 13 70 BATTLE CREEK, MICHIGAN 49016 1. Continue Sending Sales Catalogs		******************** *	NOTE!! * *	DO NOT MAIL BIDS * *	TO THIS ADDRESS * 'ick'k'k'ic'jc'jc'k'fc'fc'jc'k'k'jc'jcjctk'fc'jf'jc
□ 2.	Discontinue Sending Sales Catalogs	
□ 3.	Change of Address (print new address below)	
□ 4.	Send Bidders List Application	
NAME		
ADDRESS		
CITY	STATE	ZIP CODE
		
To continue receiving sales catalogs, check Block No. 1 on the form shown above. It is necessary to mail only one form within a 30-day period.
If you no longer wish to receive sales catalogs, check Block No. 2 on the above form.
To change your address, check Block No. 3 on the above form and print your new address. Allow four weeks for change to be effected.
NEW BIDDERS - If you wisfr to be placed on the mailing list to receive sales catalogs, check 0 Block No. 4 and print your name and addres'
HQ DPDS FEB"^ 792	REPHCES OLSC FORM 792 WHICH 15 OBf
POSTMASTER: If undeliverable return to
OoD Surplus Sales
P. O. Box 1370
Battle Creek, Michigan 49016
OFFICIAL BUSINESS PENALTY FOR PRIVATE USE, $300
Department of Defense Sale No. 41-6202
109*8 0T4
POSTAGE AND FEES PAID DEFENSE SUPPLY AGENCY Do D-304
FIRST CLASS MAIL